Installation of Roll Roofing

Nowadays, a great number of people prefer roll roofing over shingles due to several benefits it offers. First of all, almost any homeowner can affords this type of roofing because of its affordable cost. And secondly, roll roofing is very easy and quick to install. You will like the process of installing it due to the light weight of the material. In order to install it you won't even need to hire a professional group of specialists, because the help of your friend will do to do it on your own.

However, before installing roll roofing it's necessary to prepare a number of important materials including underlayment, roofing sheets, roofing nails, a hammer, utility knife, chalk line, and certainly measuring tape. There're certain steps you'll need to follow in order to install this type of roofing correctly. Let's discuss them in detail.

Preparation

This stage involves the preparation of the roll roofing material and the roof as well. The latter should be properly cleaned in order to remove the existing debris and dirt. Before starting to install the roll roofing, it's important to repair the roof if necessary. The next thing you have to do is to roll out the sheets of the roofing on a large even surface. The material should be flat enough, so it's recommended to spread it under the warm sun. it's better to avoid installing roll roofing in cold weather.

Installation of The Underlayment

The underlayment is installed in order to create an extra protective layer for the roof. Cut the suitable strip of underlayment for your roof. Locate it on the very edge of the roof and fasten it with nails every six-eight inches. The nest strip of underlayment should be overlapped with the first one by minimum two inches. Do it until you cover the whole surface of the roof with underlayment. The surface of the underlayment should be smooth and have no wrinkles.

Installation of The Roll Roofing

As the width of the roll roofing sheet is thirty-six inches, use a measuring tape to measure thirty-five inches from the eaves. Further it's necessary to write down a line with a piece of chalk in order to create the first row. Write down the rows on the roof as they will be as a guide for you and due to them you will get a symmetrical look of the roof.

Further, roll out the roofing sheet and put l a layer of roofing cement about two inches in thickness onto the underside of the roll that will be laid out and locate it on the upper side of the underlayment. You need to nail the roofing at about eight inches between the nails. The sheet should always be smooth. And the overlap should be two inches. Use two inches of cement on the edge of the first row and put cement under the sheet you're going to install on the second row. It's highly important to nail the sheet very securely. In this way, all rows should be covered up to the line drawn by your piece of chalk.

Final stage

After covering the whole roof, the ridges should be covered. If you find additional overhang, it should be cut down with a utility knife. Remember to hide the nails, seams, and overlaps on the roof. You can do it by putting cement on them to get a unique look on your roof.

Roll Roofing Materials & Qualities

by Roof101 - Roll roofing is composition sheet roofing that is manufactured in rolls, and laid on a roof in overlapping strips. Roll roofing materials can be applied as most forms of sheathing, including underlayment and shingling, due to its availability in a wide range of materials. Some roll roofing materials include asphalt, asphalt saturated organic felt (which can be standard or specification felt), SBS modified, re-enforced fiber-glass, granulated roll roofing, and more. Often materials are mixed in order to enhance roll roofing performance and durability qualities. Some of these considerations comprise flexibility, water absorption, tear resistance, adhesion, thermal stability, and slip resistance. Asphalt roll roofing is the most commonly used roll roofing material, yet is suitable to steep roofing applications. Fiberglass roll roofing is appropriate for low sloped roll roofing applications, while modified bitumen is used on almost all roofing types.

Services And Advantages of Roll Roofing Installation

Roll roofing offers a lot of advantages in terms of time and money. First of all, installation of roll roofing is quicker and simpler than any other method of roofing installation. By the way you can easily purchase any kind of the roll roofing material. Besides, it's easily cut and installed (by rolling out the material onto the roofing surface).

Nevertheless, if you're not sure in your personal skills, you can use the service of a professional roofer to install roll roofing on your house. The matter is that incorrectly covered roof can become extremely waterproofed. You can find some specialist roofing contractors in Roof101 to install roll roofing on any kind of building: residential or commercial. You can purchase any kind of roll roofing materials and products. By the way, you can choose any color of the roll roofing to meet your needs and interests. Almost all roll roofing installation services are available.